The world's largest falling ball impact testing machine was developed by Goldpro New Materials. Goldpro invented the world's highest falling ball impact test equipment.

Oct 17,2020

In the golden October, with the fragrance of sweet osmanthus filling the air, on the land of Yanzhao by the majestic Taihang Mountains, Goldpro New Materials Co., Ltd. has given birth to a falling ball impact testing machine with the world's largest drop height, extremely advanced inspection efficiency and methods, the most accurate data, and the strongest reliability and stability! Goldpro's falling ball impact testing machine is crucial equipment for testing the anti-breakage capability and fatigue life of steel balls before they leave the factory, providing strong evidence and important assurance for the safe and efficient operation of semi-autogenous mills (SAG Mills) and ball mills. It is understood that the world's largest SAG mill currently has a diameter of 42.7 feet (about 13 meters) and a drop height of around 10.5 meters. Goldpro New Materials has invested heavily to meticulously design and build a falling ball impact testing machine with an effective drop height of 14 meters. The testing intensity for steel ball toughness and fatigue life is far higher than actual working conditions, fully meeting inspection requirements. After the falling ball impact testing machine was completed, Goldpro New Materials conducted multiple tests on its own φ5-inch (approx. φ127mm) and φ5.5-inch (approx. φ140mm) steel balls. After continuous dropping tests exceeding 120,000 times, the steel balls showed no chipping, no deformation, and zero breakage. Every batch of steel balls supplied to BHP and Rio Tinto must undergo inspection by this falling ball impact testing machine to ensure qualification before leaving the factory. The results feedback from customers after use are consistent with the testing data, once again proving that the falling ball impact testing machine built by Goldpro New Materials has a higher conformity with simulated working conditions and stronger reliability. At the same time, customers reported that the steel balls supplied by Goldpro have a longer lifespan and higher hardness, genuinely saving them costs and increasing profits.

In the golden October, with the sweet fragrance of Osmanthus fragrans filling the air, a world-leading falling ball impact testing machine was born at Gangnuo New Materials Co., Ltd., nestled in the majestic Taihang Mountains of Hebei province. This machine boasts the largest drop height globally, the most advanced testing efficiency and methods, the most accurate data, and the strongest reliability and stability.

In golden October of this autumn with Osmanthus fragrans, Goldpro new material Co,.Ltd which is located in Yanzhao land surrounding by great Taihang mountain, has successfully issued falling ball impact test equipment with world highest falling height that is proved to have most testing efficiency, advanced testing method, most accurate test result and dependency as well as stability.

The Gangnuo falling ball impact testing machine is a crucial piece of equipment for testing the impact resistance and fatigue life of steel balls before they leave the factory. It provides strong evidence and guarantees for the safe and efficient operation of semi-autogenous grinding mills and ball mills. It is understood that the world's largest semi-autogenous grinding mill currently has a diameter of 42.7 feet (approximately 13 meters), with a drop height of around 10.5 meters. Gangnuo New Materials' meticulously designed and manufactured falling ball impact testing machine has an effective drop height of 14 meters, significantly exceeding actual operating conditions in terms of testing intensity for steel ball toughness and fatigue life, fully meeting testing needs.

Goldpro’s falling ball impact test equipment is mainly for testing balls’ impact breakage force and anti-fatigue life which is important procedure to ensure highly efficient and safe operation of SAG Mill and Ball Mill. Diameter of world largest SAG Mill is about 42.7 feet, around 13 meters. It has about 10.5 meter falling height. In order to meet test requirement, Goldpro has invested a lot to develop the equipment with effective falling height of 14 meters of which performance to test ball toughness and fatigue life is too much higher than actual working condition requirement.

After the completion of the falling ball impact testing machine, Gangnuo New Materials conducted numerous tests on its own φ5-inch (approximately φ127mm) and φ5.5-inch (approximately φ140mm) steel balls. After more than 120,000 consecutive drops, the steel balls showed no chipping, deformation, or breakage. Every batch of steel balls supplied to BHP Billiton and Rio Tinto must pass this falling ball impact test to ensure quality before shipment. Customer feedback after use is consistent with the test data, further proving that the falling ball impact testing machine built by Gangnuo New Materials has a higher degree of simulation of working conditions and stronger reliability. At the same time, customers have reported that steel balls supplied by Gangnuo have a longer lifespan and higher hardness, resulting in significant cost savings and increased profits.

After falling ball impact test equipment installed, Goldpro has tested 5’ (around 127MM) and 5.5’(around 140MM) steel balls for many times. By over 120,000 times dropping test continuously, Goldpro’s steel ball has no drop piece, no deformation and zero breakage. Each batch of balls for Rio Tinto and BHP must be tested by falling ball impact before delivery to ensure quality with no defect. Actual performance responded by customers of our balls kept consistent with test result which proved simulated application of Goldpro’s falling ball impact test equipment was highly dependable and consistent with actual working conditons. What’s more, customer praised that Goldpro’s steel ball has longer wear life, higher hardness so that cost was less but profit was more.